Here comes the guide on how to update Audi MMI 3G firmare.Follow this guide you need to know try it at you own risk.
2018 Audi A4 / S4 – PDF Owner's Manuals 2018 Audi A4 / S4 — Owner's Manual. 2017 Audi A4 / S4 – PDF Owner's Manuals. New materials were added and the controls of the MMI system changed. The new Audi S4 is equipped with a 6-cylinder TFSI, a volume of 3 liters. It develops power in 333 hp. And a torque of 460 Nm, available in the range. The available MMI 3G has a contact capacity of 5,000 contacts over four phone profiles. Each individual profile can load/import 2,000 entries including the ability to import 100 contacts with full addresses and multiple phone information. Audi Interface. Multi Function AV input cable. RGB Input cable (for aftermarket satnav or Car PC). Main Monitor Connection Cable. Power/Connection Loom (ACC, 12V, Gnd, MMI etc). Control Pins Connection cable (not used). User Manual. Before starting the installation, please ensure that the ignition on your car is switched OFF. First open the hidden menu, enter Car, cardevicelist, find AuxiliaryHeating and check on restart MMI. After opening VCDS software, enter 5F module, open the long coding help to find byte6, the bit1 checked, save and exit. Then enter 08 Auto HVAC module, open the long coding help, the Byte1 in the bit 3 and bit 4 are changed to 1, save and exit.
Caution:If your system already had another activator(like Carson's one) we recommend making an emergency update before doing anything else.
Related Contents:
Audi MMI 3G Firmware Download:
How to update Audi MMI 3G Firmware:
Format your SD in FAT 32
Copy the root of your firmware in the SD(like picture below)
Open 'Engineering Menu'
| MMI 2G | SETUP+RETURN |
| MMI 2G(A8) | TEL+RETURN |
| MMI 3G | SETUP+RETURN |
| MMI 3GP | CAR+BACK |
| MMI 3GP(A1) | BACK+TONE |
| RMC(A1/Q3) | BACK+TONE |
| RMC(A6+A7) | CAR+BACK |
| MIB | BACK+Top Left Button |
2018 Audi Mmi Manual
A screen like this will appear
Insert the SD card with the firmware in slot 1
Press the 'Update' option using the MMI Control Panel
Scroll down with the big knob and select the source in the menu(SD 1) press it.
Select the firmware pressing the big knob once
Caution:Some users report problems with bose sound system,if you have bose and don't know how to recode it… we recommend unselect it from list(using User-Defined Mode) before updata
If you update it,you will have to visit an expert or your dealer for recode it.If you can,we recommend update it,just because it sounds better.
Select 'Standard'
You will see a list with all devices that firmware will update
Scroll to bottom and press 'Start Update' or 'Start Download'
Another screen appears informing you that once you start updating this must not be interrupted.Select 'Start' and press the big knob.
The MMI will reboot and the update process will start
Audi Mmi Connect
After several minutes/hours(it depends that what it has to update and the speed of your SD) the firmware update will be done.
Aresume with all updated modules will appear.Scroll down and press 'Continue'
Audi MMI 3G Firmware Download:
How to update Audi MMI 3G Firmware:
Format your SD in FAT 32
Copy the root of your firmware in the SD(like picture below)
Open 'Engineering Menu'
| MMI 2G | SETUP+RETURN |
| MMI 2G(A8) | TEL+RETURN |
| MMI 3G | SETUP+RETURN |
| MMI 3GP | CAR+BACK |
| MMI 3GP(A1) | BACK+TONE |
| RMC(A1/Q3) | BACK+TONE |
| RMC(A6+A7) | CAR+BACK |
| MIB | BACK+Top Left Button |
2018 Audi Mmi Manual
A screen like this will appear
Insert the SD card with the firmware in slot 1
Press the 'Update' option using the MMI Control Panel
Scroll down with the big knob and select the source in the menu(SD 1) press it.
Select the firmware pressing the big knob once
Caution:Some users report problems with bose sound system,if you have bose and don't know how to recode it… we recommend unselect it from list(using User-Defined Mode) before updata
If you update it,you will have to visit an expert or your dealer for recode it.If you can,we recommend update it,just because it sounds better.
Select 'Standard'
You will see a list with all devices that firmware will update
Scroll to bottom and press 'Start Update' or 'Start Download'
Another screen appears informing you that once you start updating this must not be interrupted.Select 'Start' and press the big knob.
The MMI will reboot and the update process will start
Audi Mmi Connect
After several minutes/hours(it depends that what it has to update and the speed of your SD) the firmware update will be done.
Aresume with all updated modules will appear.Scroll down and press 'Continue'
Select 'Cancel documentation' and the MMI will reboot
Readers who read this article also read:
Featured Topics
Top Seller
Support
Audi Mmi 3g 2018 Manual Transmission
Hot Articles
Audi Mmi 3g 2018 Manual User
- Secured Shopping
All transactions are protected by VeriSign. - 30-day Money Back
Come with a up to 30-day Money Back Guarantee. - Automatic Updates
Automatically check and download the latest updates - Customer Service
Email help within 24 hrs.
Audi Q5 Mmi Manual
